Calculation and Drawing of Hexagon Bolt: Hexagon bolt is a very common bolt, which is widely used. It can fasten connected parts by bolts, nuts and washers. The function of the ring is to prevent the surface of the connected part from being damaged when tightening the nut, and to make the pressure of the nut evenly distributed on the surface of the part. All the connected parts are processed with non threaded through holes, the diameter of which is slightly larger than the thread diameter, and the specific size can be checked.
Calculation and drawing of hexagon bolt
When drawing the bolt connection, first calculate the nominal length L of the bolt. The length of bolt L ≈ K + m + G1 + G2 + B1, after calculating the length, check the national standard, and take the standard length L according to the bolt length series. The following figure shows the assembly drawing of bolt connection. The size and specification of bolt connection can be obtained from the national standard table. However, approximate dimensions can be used when drawing threaded fasteners. Among them: B1 ≈ 0.3d; m ≈ 0.8d; K ≈ 0.7d; e ≈ 2D; D2 ≈ 2.2d; C ≈ 0.15dx45; H ≈ 0.15d; e ≈ 2D.
Grade 10.9 Hex Bolts, Carbon Steel Hex Bolts, Black Oxide Finish Hexagon Bolts, DIN Standard Hex Bolts 4.9 8.8 grade, High tensile Bolts and nuts, Oxidation surface 10.9 Grade ANSI Hexagonal head bolt China supplier Grade 10.9 Hex Bolts Parameter Grade: rade B7 Surface treatment:Black Oxide Size:3/8-3″ Certificate:ISO9001:2008 ROHS Application:Building Type:Hex Bolts Nuts Packing:Cartons+plastic Bags […]
High tensile Bolts and nuts DIN931, 8.8 Grade ANSI Hexagonal head bolt China supplier A193 Grade B7 Heavy Hexagon Bolt Parameter Grade: rade B7 Surface treatment:Black Oxide Size:3/8-3″ Certificate:ISO9001:2008 ROHS Application:Building Type:Hex Bolts […]