How to Cut Skirting Boards with a Mitre Saw

This article should really help you out, if you want to know how to cut skirting boards with a mitre saw. Some people like to change their skirting boards to change the look of their room, some as part of a general home improvement and others simply because they have to.

At first this may seem a daunting task, but if you just do a little planning, it is a great deal easier than you may first think. Having the right tools to make clean mitre joints is probably the most important thing to have ready. There are really 3 choices of saw that can be used to cut accurate mitre joints.

Mitre Box
Precision Saw
Power Mitre Saw

Planning Your Skirting Board Project

If you are either laying tiles, a wooden floor or a laminate floor then go ahead and do that first. The skirting boards will go on after you have completed that work. On the other hand if you are laying carpet, vinyl tiles or vinyl flooring then it should be skirtings first and the floor covering later.

The reasons for these decisions are simple enough. Wooden flooring and tiles will probably be there for a very long time, whereas carpets and vinyls will be changed more often. Every time that you wanted to change the look of your carpet or replace your vinyl, you would not want to also have to remove or replace your skirting boards.

Tool List for fitting Skirting Boards

Measuring tape
A pencil for marking
Some way of cutting a mitre such as a mitre saw, a precision saw or a mitre box (Can also use a hand saw and a mitre saw protractor)
A drill
A hammer/mallet
A silicone gun
A stud locater is really useful but not essential.

If you have those tools then you are good to go. You will also need a few other bits and pieces to do the job properly and I have listed those below. First though allow me to take you through the main types of skirting that are available in most DIY stores or builder’s merchant stores.

Types of Skirting Boards

Some people prefer real wood, but the cheap and more popular choice is MDF skirting. Skirtings boards also have slightly different profiles and the most common are bullnose, chamfered, ogee, and torus.

MDF skirting is a popular choice as is softwood skirting. Veneers in light oak, pine etc are also available. Some of the MDF type can also be what is called “white primed.”

You can get these in various designs such as round, chamfered and rebated or just as a plain option. It simply comes down to personal taste and how much budget you have available.

These skirting boards tend to come in a number of standard lengths which are:-

2,400 mm (7.87 feet)
3,600 mm (11 feet and 8″)

The widths can vary quite and some typical measurements are

94 mm (3.7″)
119 mm (4.68″)
169 mm (6.65″)

Typical prices per piece of skirting simply depend on the type that you buy with the cheapest being around £4-5 per length and going all the way up to £40-50 per length.

It can be expensive to replace skirting boards if you opt for something like a high quality Oak Veneer. The cheaper options are usually something like a basic MDF board.

Measuring a Room for Skirting Boards

This is your starting point to see how much skirting you need. Measure around the room and add a 20% figure to that number. You need to allow that amount for cutting and waste.

For example if a room measures 4 metres by 3 metres. The skirting measurement would be 4+4+3+3 which is 14 m. Then add 20% which is 14/5 = 2.8 and a total of 16.8 metres or 16,800 mm.
If the length of skirting you bought was 2,400 mm then you would need 16,800/2400 which would be 7 boards.
If the length of skirting you bought was 3,600 mm then you would need 16,800/2400 which would be 4.6 boards so you would need to buy 5 boards

Hopefully all of that makes sense but just be sure to measure the room carefully as you do not want any waste. If you do buy extra boards most stores will take them back providing they have not been damaged.

Other Items You Will Need for Skirting Boards

So if you have the tools and have measured and picked out your boards, then you are almost good to go.

You may however need some panel pins and screws, some type of grabbing adhesive, and the all important wood filler.

It really does depend on the condition of the wall you are attaching the skirting boards too. Large gaps will need to be filled as an example.

Fitting the Skirting Boards

Rather that write this all down it is much easier to see it being done on video, so here is one of the best that I have watched. It is a short and sweet version for those who just want to get the overall process.

For those who like a lot more detail here are two really excellent videos. These go into a lot more detail and take you slowly through the process.

So hopefully you have found this helpful. As you can see all of this was done using a mitre box. A power mitre saw just makes this even quicker.

Clearly the power saw will be more accurate and will save you a lot of time and effort. So the next time you need skirting boards done, this should help you get through the task without any issues. My strong advice is to measure the sizes carefully, decide which type of board you want or can afford, and then go and purchase it.

Going to a builder’s yard and buying in bulk will always save you money. Once you have made your decision then it is time to start fitting the skirting board. As us old carpenters say, measure twice and cut once.

@media (min-width: 300px){[data-css=”tve-u-186db7d80d9″].tcb-post-list #post-1380 [data-css=”tve-u-1774a4b742f”]{background-image: url(“https://uktoolguide.com/wp-content/themes/thrive-theme/inc/assets/images/featured_image.png”) !important;}[data-css=”tve-u-186db7d80d9″].tcb-post-list #post-1380 [data-css=”tve-u-1774a4b742e”]:hover [data-css=”tve-u-1774a4b742f”]{background-image: linear-gradient(rgba(255, 255, 255, 0.08), rgba(255, 255, 255, 0.08)), url(“https://uktoolguide.com/wp-content/themes/thrive-theme/inc/assets/images/featured_image.png”) !important;}}

How to Cut Skirting Boards with a Mitre Saw –

Planning Your Skirting Board Project

Tool List for fitting Skirting Boards

Types of Skirting Boards

Measuring a Room for Skirting Boards

Other Items You Will Need for Skirting Boards

Fitting the Skirting Boards

Einhell TC-SM 2131 Review

Best Dewalt Mitre Saw UK

Best Draper Mitre Saw UK

Dewalt DCS365N Review

Best Mitre Saw Accessories

Mitre Saw Buying Guide

Leave a Reply